Marabu Porcelain & Glass 3mm Tusj, 10stk

Water-based, odourless, light-fast
Pump system with highly pigmented ink
Dishwasher-safe after curing (max. 50°C)
4 hours drying, curing with 160°C/30min!
Different paint tips: Multi-purpose tip 0,8 mm, Multi-purpose tip 1-2 mm, Multi-purpose tip 2-4 mm and calligraphy tip 1-2,5 mm
Suitable for porcelain, glass, metal, mirrors, ceramic, terracotta and stone

Veiledning:

Leave to dry for 4 hours, then fire in the oven for 30 minutes at 160 °C (do not preheat). Leave to cool down in the oven. Painted tableware should be washed at max. 50 °C on a glasses/cups cycle.

Tips:

Valve system/pump system: Pumping markers
To activate the valve system, shake the marker with the cap in place (the mixing balls have to be clearly audible). Then remove the cap and push down the tip down on a neutral surface a few times until the ink becomes visible. Please note: 1. The thin 0.8 mm tip only has to be pumped twice. 2. Metallic and glitter colours have to be shaken longer as the pigments are heavier. 3. Proceed slowly when pumping the Marabu Painters as too much pumping can lead to excessive discharge of ink.

Pumping/activating Porcelain Painter
The ink is highly viscous and contains a lot of pigment. It therefore requires some time until it appears at the tip, so please proceed with patience and care when pumping. Otherwise the paint might spurt from the side of the shaft if the marker was pumped too much. If this happens, wipe the marker or clean it with water: Remove the tip and rinse, dry completely and replace into the shaft, then carefully continue pumping.

Omitting cutting areas and drinking edges
Cutting areas of plates and drinking edges of mugs and glasses should not be painted as cutlery could damage the designs.

Closing the caps
Close the cap of the Marabu Painter with a “click” after use.

Outlines
Outlines painted with the Porcelain Painter should be left to dry briefly before filling in.

Dishes for everyday use
Glass and porcelain objects have to be cleaned thoroughly before painting. For especially effective cleaning, scrub the object with an abrasive detergent and a sponge and then wipe with Marabu Cleaner or with white spirit to ensure it is free from dust and grease. Before painting, rinse off all detergent residue with plenty of clean water.

Fingerprints
When using Porcelain for KIDS, Porcelain Painter and Glas Painter with children please note: Do not touch the cleaned painting surface with your hands. Fingerprints can prevent the paint from adhering properly.

Sytilbehør